Footprint chart vs cumulative delta chart: price-level detail vs a running delta series
A footprint shows bid and ask volume at each price inside a bar. A cumulative delta chart adds bar deltas into one running line. Here is how to read both in one order flow workspace.

Footprint chart vs cumulative delta chart: the short answer
A footprint chart shows how volume traded at each price level inside a bar, split into bid and ask volume, so you can see where inside the bar activity happened. A cumulative delta chart throws that price detail away and keeps one number per bar, the running total of ask volume minus bid volume since a reset point. The footprint answers "where in this bar did buying or selling hit?" The cumulative delta answers "how has net aggressor volume developed over the session?"
Both come from the same trades. They are two zoom levels of one data stream, which is why they work well as order flow panels on the same chart.
Get professional chartbooks for Sierra Chart
DOM, footprint, heatmap and market profile setups, installed in seconds. Our trading courses cover the method behind them.
“Chartbooks are superb, I save a lot of time! Thanks for these quality products.”
The same trades at three levels of aggregation
Every trade on an exchange such as CME prints at a price and is classified by whether it hit the bid or lifted the ask. From that stream you can build three levels.
- Price-level delta. For one price inside one bar, ask volume minus bid volume. This is what a footprint cell can display.
- Bar delta. The sum of all price-level deltas in that bar. One number per bar.
- Running delta (cumulative delta). Each bar delta added to the previous total, starting from a reset such as the session open.
A hypothetical ES example with a 0.25 tick size makes this concrete. Suppose a one-minute bar trades across four prices:
- Top price: 40 at bid, 110 at ask, price-level delta +70
- Second price: 180 at bid, 150 at ask, delta -30
- Third price: 220 at bid, 260 at ask, delta +40
- Bottom price: 90 at bid, 30 at ask, delta -60
Bar delta is +70 - 30 + 40 - 60 = +20. If the running delta was +1,500 before this bar, the cumulative delta chart prints +1,520. The footprint still shows you that the strongest ask activity sat at the top of the bar and the strongest net bid activity at the bottom. The cumulative delta line shows only a small uptick. Neither view is wrong. They answer different questions.
If you want the full mechanics of per-bar versus running totals and how reset choices change the line, see the guide on cumulative delta vs bar delta in futures. This article stays on the difference between price-level detail and the aggregated series.
Comparison table
| Aspect | Footprint chart | Cumulative delta chart |
|---|---|---|
| Unit of information | Each price level inside each bar | One value per bar, chained over time |
| What it shows | Bid volume, ask volume, delta, sometimes imbalances per cell | Running total of ask minus bid volume since a reset |
| Typical display | Numbers inside the price bars | Line or candle-style bars in a subgraph below price |
| Best question it answers | Where inside the bar did activity concentrate? | How has net aggressor volume developed across the session? |
| Time horizon | One bar at a time, close up | Many bars, trend of the series |
| Sensitive to | Row size, tick data quality, bar period | Reset point, missing data anywhere earlier in the session |
| Main limitation | Hard to see the bigger picture across dozens of bars | Hides where inside the bar the volume traded |
| Sierra Chart study | Numbers Bars | A cumulative delta study, check the Studies Reference for the exact name in your version |
How to read the footprint side
On a footprint, read the cells, not just the bar. A few practical checks:
- Where is the largest delta in the bar? Strong ask-side delta concentrated at the bar high reads differently from the same delta spread evenly across the bar.
- How does the bar close relative to its heaviest cells? A bar that trades heavy volume at the top and then closes near the low tells a different story than the bar delta alone.
- Row size. On NQ, a row size of one tick (0.25) gives fine detail but tall bars. Grouping rows, for example 4 ticks, makes the footprint readable on a fast day but merges price-level deltas. On CL, with a 0.01 tick, row grouping is common for the same reason. Remember that a grouped row is already an aggregation.
In Sierra Chart, footprints come from the Numbers Bars study, not from market depth settings. The column you choose for the cell text (bid x ask volume, delta, total volume) decides which price-level view you are looking at.
How to read the cumulative delta side
The cumulative delta line is read as a series against price:
- Direction alongside price. Price making new session highs while running delta also rises means aggressive buying and price are moving together on this view.
- Divergence. Price pushing higher while the running delta flattens or falls means the net aggressor volume is not keeping pace. It is an observation to investigate on the footprint, not a signal.
- Slope changes after a level. A sharp change in slope as ES reaches a prior high or a value area edge shows that participation changed there.
Because it is cumulative, one bad stretch of data early in the session shifts every later value. That is why reset and data validation matter more here than on the footprint. The Sierra Chart cumulative delta chart setup guide covers adding the study and checking session resets.
Building the two order flow panels in one workspace
The most useful layout keeps both views on the same chart so every bar lines up.
- Enable tick by tick data: Global Settings >> Data/Trade Service Settings >> Intraday Data Storage Time Unit set to 1 tick. The tick by tick data configuration page explains the requirement and how to reload history.
- Open an intraday chart for your instrument, for example ES or NQ on a one-minute or volume-based bar period.
- Add the Numbers Bars study to the main price region and set the cell text to bid x ask volume or delta.
- Add a cumulative delta study and place it in its own region below price. Look it up in the Studies Reference to confirm the name and inputs available in your version.
- Set the cumulative delta reset to match how you trade, typically the session start, and confirm it matches your session times.
- Validate: pick one bar, add up the price-level deltas on the footprint, and confirm the total matches that bar's change in the running delta. If they disagree, check data granularity and whether both studies use the same bar data.
If you would rather start from a configured layout than build cell settings from scratch, a Sierra Chart footprint chartbook gives you Numbers Bars with bid ask volume, delta and imbalances already set up, and you can add the cumulative delta region underneath.
Using them together without overreading
A practical routine is top-down then bottom-up:
- Scan the cumulative delta region to see whether the session's net aggressor volume is trending, flat or diverging from price.
- When something stands out, such as a slope change at a known level, zoom into the footprint for those bars to see which prices carried the volume.
- Go the other way too. A footprint bar with a large delta at one price may barely move the running line if the rest of the bar offset it.
Keep the limits in mind. Neither view shows resting orders, which belong to depth of market tools. Neither reveals intent; they show where trades were classified as hitting bid or ask. And a running delta value has no meaning on its own, since it depends entirely on the reset point.
A note on EURUSD: spot forex has no centralized trade tape, so a broker feed cannot give you a true footprint or exchange delta. Traders who want this view on the euro usually chart the CME euro FX futures contract instead.
Conclusion
The footprint is the close-up: price-level delta and bid ask volume inside each bar. The cumulative delta chart is the wide shot: one running delta series that summarizes the session. They come from the same trades, so stack them on the same chart, validate that one bar's cells add up to that bar's change in the line, and use each for the question it answers best. To skip the cell configuration step, the ready-to-use Sierra Chart chartbooks from SierraOnShop give you a footprint workspace you can open and extend.
FAQ
Can the footprint and cumulative delta disagree on the same bar?
They should not disagree on the bar total if both use the same data. If summing the footprint cells does not match the change in running delta, suspect different bar data, missing tick history or a reset happening on that bar.
Is cumulative delta just the footprint's delta column added up?
Conceptually yes. Price-level deltas sum to the bar delta, and bar deltas accumulate into the running delta from the reset point.
Which one should a beginner learn first?
Many traders find the cumulative delta line easier to scan first because it is a single series. The footprint takes more practice because each bar holds many numbers.
Does row size on the footprint change cumulative delta?
No. Grouping rows changes how price-level detail is displayed, but the bar total and the running delta stay the same.
Do these views work on volume or range bars instead of time bars?
Yes. Both are calculated per bar, so they follow whatever bar period the chart uses. Just keep both studies on the same chart so the bars align.
Set this up in Sierra Chart in seconds
Written by
Clement
Futures trader for more than seven years, specialized in order book and order flow scalping on US index futures, now building automated strategies. Founder of SierraOnShop.
More about the authorRead the order flow with the right tools
Start with a professional Sierra Chart chartbook, or learn the method with our trading courses.
“Just received the footprint chartbook. Installation took 30 seconds, works perfectly on Sierra 2800.”