Zero prints on footprint charts explained: true zero-volume cells vs display and data issues
A zero in a footprint cell can be real market information or a data artifact. Learn how to tell a true zero-volume cell from a display or data gap before you read anything into it.

What a zero print on a footprint chart actually means
A zero print on a footprint chart is a cell where one side of the bid x ask pair shows 0, meaning no volume was classified on that side at that price during that bar. A true zero is market information. A zero caused by missing tick data, a display setting or the wrong contract is not. Before you interpret any zero, confirm which kind you are looking at, because the same "0" on screen can come from completely different causes.
This article focuses on that distinction. If you are not getting any footprint values at all, start with the Sierra Chart footprint missing bid ask volume guide instead.
Get professional chartbooks for Sierra Chart
DOM, footprint, heatmap and market profile setups, installed in seconds. Our trading courses cover the method behind them.
“Chartbooks are superb, I save a lot of time! Thanks for these quality products.”
How a footprint cell is built
In Sierra Chart, footprint cells come from the Numbers Bars study. For each price row inside a bar, the study typically displays volume traded at the bid on one side and volume traded at the ask on the other. A trade is assigned to the bid or ask side based on how it executed relative to the market at that moment, and that classification depends on tick by tick data from your feed.
That gives three situations that all look like "zero" at first glance:
- One-sided zero: the cell exists, one side shows volume and the other shows 0. Example on ES:
0 x 37at 5412.25. - Empty row: a price inside the bar's high-low range has no cell, or shows
0 x 0, because no trades printed there in that bar. - Artifact zero: zeros appear because the data or settings cannot produce bid/ask splits, not because trading was one-sided.
Only the first two can be genuine market behavior. The third has to be ruled out first.
True zero-volume cells: what they can tell you
One-sided zeros inside the bar
A 0 x 37 cell means every contract recorded at that price in that bar was classified on the ask side. In a fast NQ move, it is normal to see a run of one-sided cells as aggressive orders lift offers through several ticks. On its own, a single one-sided zero says little. It describes where trades were classified, not why they happened or what comes next.
What is worth noting is context: how much volume sits on the active side, whether the zero sits at the bar extreme or in the middle, and whether neighboring rows show the same pattern. A one-sided zero with 3 contracts in quiet overnight ES is a very different observation from one with several hundred contracts during the regular session open.
Zeros at the bar high or low
Zeros at the extremes are where most traders focus, because they relate to the idea of a finished or unfinished auction. That reading has its own rules and caveats, covered in unfinished auction on a footprint chart explained. The point here is narrower: only apply that reading once you have confirmed the zero is real.
Empty rows and price gaps
In very fast markets, price can skip ticks, so a bar may show a row with no prints between two active rows. On CL, with a 0.01 tick size, this is more common during inventory report releases than on a quiet afternoon. An empty row is a true "no trade at this price in this bar" observation, but it also depends on your row size. If you group 4 ticks per row on ES, a skipped single tick disappears into the aggregated row and you will never see it.
When the zero is a display or data issue
These are the common causes of artifact zeros. Check them in this order.
1. Historical data is not tick by tick
Footprints need tick data. In Sierra Chart, go to Global Settings >> Data/Trade Service Settings and confirm Intraday Data Storage Time Unit is set to 1 tick. If older history was stored at a coarser unit before you changed this, those older bars cannot show a true bid/ask split. A typical symptom is that recent bars look normal while older bars show zeros on one side across every row, or totals with no sensible split. The Tick by Tick Data Configuration documentation explains the requirement, and the footprint tick data requirements guide covers how to verify historical cells.
Tell-tale sign: the zeros follow a time boundary, not the price action.
2. Wrong or thin contract
After a quarterly roll, a chart still pointing to the expiring ES or NQ contract, or a deferred CL month, will show sparse volume and lots of one-sided zeros. That is real data, but from a market almost nobody is trading. Check the symbol in Chart >> Chart Settings and compare it with the front month your DOM is trading. The Chart Settings documentation lists where the symbol and session options live.
3. Display settings hiding or rounding values
Numbers Bars has many display options, including which values appear in each column, text size and how values are colored. Rather than relying on a specific setting name, open the study settings and check whether anything controls how zero or low values are drawn, and whether the columns you see are actually bid volume and ask volume rather than delta or total volume. A cell showing 0 in a delta column means bid and ask were equal, which is not a zero print at all.
4. Session and time zone boundaries
If your session times cut a bar in an unexpected place, a bar can contain only a handful of trades from the edge of a session. Those bars naturally produce one-sided zeros. Confirm the session times match the market you intend to read, for example the regular trading hours or the full Globex session for ES.
5. Spot forex instruments
On spot EURUSD, there is no centralized exchange tape, so any bid/ask split comes from your provider's own ticks. Zeros there are not comparable to zeros on an exchange-traded futures contract. If you want order flow on the euro, the CME euro FX futures contract (6E) is the closer equivalent to reading ES or CL.
A quick verification routine before you interpret a zero
Run these checks whenever a zero catches your attention:
- Zoom out. Are zeros isolated, or do they cover whole bars or a whole time period? Pattern-wide zeros point to data, isolated ones may be real.
- Compare with recent bars. If live bars show normal two-sided cells and older ones do not, suspect stored history.
- Check the column. Confirm you are reading bid volume and ask volume, not delta or a calculated value.
- Check the row size. Note how many ticks each row represents before reading empty rows or gaps.
- Check the symbol and session. Front month, correct session times.
- Cross-check one cell. Pick the price, open Time and Sales for the same instrument and period, and confirm trades actually printed the way the cell shows.
If you prefer to start from a layout where the columns, row size and coloring are already set and documented, a Sierra Chart footprint chartbook removes the guesswork about which column is which, though you still need tick data enabled on your feed.
Putting it together
A zero print is only useful once you know it is real. True zero-volume cells and one-sided bid ask prints describe where trades were classified in a specific bar, at a specific row size, on a specific contract. Data gaps, coarse historical storage, a wrong contract or a misread column produce zeros that look identical on screen but carry no information. Verify first, then read the cell in context, and treat any single zero as one observation rather than a signal.
If you want a ready Numbers Bars layout to practice this verification routine on ES, NQ or CL, browse the Sierra Chart chartbooks at SierraOnShop.
FAQ
Why do zeros appear more often during the overnight session?
Volume is lower outside regular trading hours, so each bar contains fewer trades and it is more likely that a price row only sees activity on one side. These zeros can be genuine, but they carry less weight than zeros in active trading.
Do zero prints look different on volume bars or range bars?
The cell logic is the same, but bar construction changes how many trades each bar holds. Bars built on a fixed number of contracts or ticks can spread or concentrate activity differently than time bars, so compare zeros only within the same bar type and settings.
Can replay show different zeros than the live chart did?
It can if the stored data differs from what you saw live, for example if part of the history was downloaded at a different storage unit or was missing. Replay is only as accurate as the tick data saved for that period.
Should I change row size to remove empty rows?
Increasing ticks per row will merge empty rows into active ones, which makes the chart cleaner but hides price skips. Pick a row size for readability and remember what it hides, rather than changing it to make zeros disappear.
Set this up in Sierra Chart in seconds
Written by
Clement
Futures trader for more than seven years, specialized in order book and order flow scalping on US index futures, now building automated strategies. Founder of SierraOnShop.
More about the authorRead the order flow with the right tools
Start with a professional Sierra Chart chartbook, or learn the method with our trading courses.
“Just received the footprint chartbook. Installation took 30 seconds, works perfectly on Sierra 2800.”